Custom Magnetic Screen Door - Small

A custom magnetic screen door made to your exact size — any width from 16" to 80", heights up to over 109". Built to your measurements for standard single entry doors, narrow patio and balcony doors, and RV or camper doors: magnetic closure that snaps shut behind you, fine mesh that stops mosquitoes and lets the breeze in, and a no-drill install that takes minutes.

Is this the right size for your door?

Best for:

• Standard single entry doors (front, back, side)
• Narrow patio or balcony doors
• RV, camper, and trailer doors
• Any opening from 16" to 80" wide

Not the right fit for:

• Wide patio, French, or garage openings over 80" — see the Custom Magnetic Screen Door, up to 190" wide
• Frames with no flat surface for adhesive mounting
• Outdoor frames that stay wet for long periods

Three steps from your doorway to your door

1. Measure — width × height of the outer door frame, edge to edge. Our guide shows you exactly where to put the tape.
2. Enter your exact size — type your numbers in inches and pick your mesh color. Price is set by size range — you'll see it update as you choose. We build to your numbers, not a "close enough" stock size.
3. We make it and ship it — made to order in 3–5 business days, then free US shipping.

Not sure about your measurements? Email us a photo of your doorway with a tape measure in frame before we cut — we'll confirm the fit with you first, no charge: support@coverwith.com

We make it after you order it

Every screen is cut to your doorway once you order — so there's no warehouse of unsold stock, and no offcuts from forcing a standard size to fit. You get a screen that fits, and nothing gets made just to sit in a landfill.

Closes itself. Every time.

Heavy-duty magnets run the full length of the center seam, top to bottom. Walk through with your arms full and the screen snaps shut behind you. The closure stays aligned in a breeze and reseats cleanly after pets push through.

Tight enough for mosquitoes. Open enough for the breeze.

The mesh is woven tight enough to keep mosquitoes, gnats, and house flies out, while staying open enough to let air move through and still see the yard. Light comes through; the draft you're missing with the door shut comes with it.

Made for households with paws

A reinforced mesh weave stands up to claws better than a standard polyester screen, and double-stitched edges keep the seams from pulling apart when your dog decides the entry is a self-opening door. The magnetic seal lets pets in and out without leaving the door propped open. For heavy-duty pet use, see the Custom Pet-Proof Magnetic Screen Door — same custom-fit sizing, heavier mesh.

No drills. No tools.

What's in the box:

• Magnetic screen, made to your size
• Industrial hook-and-loop tape (loop side pre-applied; hook side mounts to your door frame)
• Pushpins (optional reinforcement for fabric or stucco frames)
• Step-by-step instructions

How it works:

1. Wipe the door frame clean and dry.
2. Peel and stick the hook-side tape around the inside of the frame.
3. Press the screen onto the tape, starting at the top corners.
4. Center the magnets so they meet down the middle.

Frame note: the adhesive needs a flat, clean, dry surface. Painted wood, vinyl, and aluminum work well. Brick, stucco, and textured surfaces use the included pushpins.

What it's made of

• Mesh: tight-weave polyester, sized to block common biting insects (mosquitoes, gnats, house flies) while keeping airflow open.
• Edge binding: double-stitched polyester webbing.
• Magnets: neodymium, sealed in vinyl pockets along the full center seam.
• Tape: industrial hook-and-loop with 3M-backed adhesive.

Have a specific durability or material question before ordering? Email us — we'll answer honestly, trade-offs included.

Custom-made, but not a gamble

Because each screen is cut to your size, we can't resell a returned one — so we do the work up front to get it right. Send us your measurements or a photo of your doorway and we'll confirm the fit before we cut.

• Manufacturing defect, transit damage, or wrong size shipped — free replacement. Most cases we just remake it, no return to mail back.
• A measurement mistake on your end — because it's cut to your numbers, we can't take it back for fit. That's exactly why we'll check your measurements before we cut — send a photo.
• Changed your mind before we start — email within 24 hours of ordering and we'll cancel for a full refund.

It's a made-to-order product — treat it like a tailored item, not an off-the-shelf one.

Questions before you order

How do I measure my doorway?

Measure the outer door frame — width edge to edge, height top to floor. Take three measurements each way and use the largest. Step-by-step guide →

Can I return it if it doesn't fit?

We check your fit before cutting; sizing returns aren't accepted, but manufacturing defects are replaced free. Send a photo before production if unsure.

Will the adhesive hold on my frame?

Wood, vinyl, and aluminum: yes. Brick, stucco, or textured surfaces: use the included pushpins.

Can my pet push through it?

Yes — the magnetic seal opens with light pressure and snaps shut behind them.

Does it actually stop mosquitoes?

The mesh is sized to block common US biting insects.

What's the maximum size?

This Small screen runs 16" to 80" wide. Wider than that? See the Custom Magnetic Screen Door — up to 190" wide.

What if the tape or a magnet fails later?

Email us and we'll send replacement parts. Spare tape and tacks are in our Accessories collection.

Does it block light or airflow?

Light passes through; airflow is close to a fully open door.

How long until it arrives?

3–5 business days to make, plus free US shipping — about 1.5–2 weeks total.

Do you ship outside the US?

US shipping today. We're setting up shipping to the UK, Germany, and France — email us and we'll let you know when your country is live.

✓ Made to order in your exact size  ✓ Free US shipping  ✓ Free replacement on manufacturing defects  ✓ Real people answer your emails

1. Measure your doorway — width × height of the outer frame, edge to edge. Our guide shows exactly where to put the tape.
2. Enter your exact size and pick your mesh color — type your numbers in inches. Price is set by size range and updates as you choose.
3. We make it and ship it — made to order in 3–5 business days, then free US shipping.

Not sure about your measurements? Email a photo of your doorway to support@coverwith.com before we cut — we'll confirm the fit first, free.

Before you order: a wrong measurement is the most common reason a custom screen doesn't fit. This guide takes about three minutes. If anything looks unclear, send us a photo of your doorway — we'll check it for you before production.

You're measuring the outside of the frame

Most people instinctively measure the door itself, or the opening between the trim. That's the wrong number for a magnetic screen. You want the outer edge of the door frame — the flat surface where the screen's adhesive tape mounts. That's almost always larger than the door panel, and larger than the opening.

Width: outside edge to outside edge

1. Hold the tape measure horizontally across the top of the door frame.
2. Anchor at the outer left edge of the frame.
3. Pull straight across to the outer right edge.
4. Write the number down in inches.

Take three measurements — top, middle, and bottom. Frames are rarely perfectly square. Use the largest number.

Height: outside top to floor (or threshold)

1. Hold the tape vertically along one side of the frame.
2. Anchor at the outer top edge of the frame.
3. Pull straight down to the floor, or the threshold your screen will sit against.
4. Write the number down in inches.

Take three measurements — left, center, and right. Use the largest number.

Outer frame ≠ door opening

Term	What it means	Use it?
Door panel	The actual door slab	❌ No
Door opening	The empty space the door fills	❌ No
Outer frame	The trim around the door, molding included	✅ Yes — measure this

The screen mounts onto the outer frame so the panel hangs in front of the opening. Measure the opening only, and your screen comes out too small — gaps let bugs in.

Different doorways, different tricks

Patio / sliding doors

• Measure the full outer trim, covering both panels' worth of width.
• Your screen needs to cover the whole opening even when one panel stays put — so measure across the combined frame.
• If the patio door has decorative molding wider than the trim, measure to the outer edge of the molding.

French doors

• Measure as one continuous opening — outer left frame to outer right frame.
• Height: top frame to floor.
• Don't measure each door separately. The screen is a single panel covering both doors.

Garage openings

• Garage openings can run 8 ft to 16 ft or more wide. Confirm your number is in inches, not feet, before you enter it.
• Measure to the outer edge of the garage frame, not the rough opening.
• Mounting to a rolling-door track? Email us first — adhesive performance varies.

RV / camper doors

• RV frames are narrow. Measure to the very edge of the metal frame, not the rubber gasket.
• Check both the interior and exterior frame — some RV doors are stepped and only one side suits the screen.

Common mistakes

• ❌ Measuring the door panel. You'll get a number that's too small.
• ❌ Measuring the door opening. Same problem — too small.
• ❌ Only measuring once. Frames are rarely perfectly square.
• ❌ Using feet instead of inches. Our form is inches only.
• ❌ Forgetting the molding. If your trim has decorative outer molding, that's the edge you measure to.
• ❌ Rounding down. Use the largest of your three numbers — too tight can't be fixed; a little loose can be trimmed during install.

Not sure? Send us a photo

We've measured plenty of doorways with customers over email. If yours is unusual — odd molding, a brick frame, a two-story patio, a recessed RV door — take a photo with your tape measure visible and email it to us before you order.

We'll confirm:

• The number you're about to enter is correct
• Whether the adhesive will hold on your frame material
• Whether you'll need the included pushpins

We do this for free, even if you don't end up ordering.

You've got your numbers

Head back to the product page, enter your width and height, pick your mesh color. Production starts as soon as you order. Back to Custom Magnetic Screen Door →

Shipping

We offer fast and free shipping for orders in US.

All orders are processed within 3 to 5 business days after receiving your order confirmation email. Shipping time is within 7 business days.

Return

This product is non-returnable in the absence of quality issues due to its custom-made nature.